Skrab

A table vice with an anvil. Cast iron. The maximum opening of the vice is 60 mm. The width of the jaws is 50 mm...

Rope diameter - 8mm, rope length - 20m, maximum traction load - 900kg, 4 block wheels..

M3*0.5*54 mm 1/4" HSS TiN SKRAB 33823 tap drills are used to drill 3 mm holes in sheet metal (or profile) and simultaneously cut M3 metric threads in 0.5 increments in one working pass. The length of the tap drill is 54 mm, the countersink size is 7 mm. M3*0.5*54 mm 1/4" HSS TiN SKRAB 33823 taps are..

M5*0.8*57.5 mm 1/4" HSS TiN SKRAB 33825 tap drills are used for drilling holes with a diameter of 5 mm in sheet metal (or profile) and simultaneously cutting M5 metric threads with a pitch of 0.8 in one working pass. The length of the tap drill is 57.5 mm, the countersink size is 7 mm. M5 * 0.8 * 57..

The M6*1.0*57.5 mm 1/4" HSS TiN SKRAB 33826 tap drill bits are used to drill 6 mm holes in sheet metal (or profile) and simultaneously cut M6 metric threads in 1.0 increments in a single pass. The length of the tap drill is 57.5 mm, the countersink size is 7 mm. M6*1.0*57.5 mm 1/4" HSS TiN SKRAB 338..

The M8*1.25*58 mm 1/4" HSS TiN SKRAB 33828 tap drill bits are used to drill 8 mm diameter holes in sheet metal (or profile) and simultaneously cut M8 metric threads in 1.25 increments in a single pass. The length of the tap drill is 58 mm, the countersink size is 7 mm. M8*1.25*58 mm 1/4" HSS TiN SKR..

The G 1/2" Machine Manual Tap is used to calibrate and thread blind holes and throughholes on the machine in a single pass. The recommended hole diameter is 19 mm...

The G 1/4" machine-manual tap is used to calibrate and create threads in blind and through-holes on the machine in a single pass. The recommended hole diameter is 11.8 mm...

..

A set of two M10 x 1.5 taps is used for manual calibration and threading of blind and through-hole taps using a special holder. The recommended bore diameter is 8.5 mm. The first tap, rough, has cut tooth tops, the outer diameter is smaller. The second, finishing, with short tooth segments, has elon..

The M10 x 1.0 machine-manual tap is used to calibrate and create threads in blind and through-holes on the machine in a single pass. The recommended hole diameter is 9.0 mm...

A set of two M10 x 1.0 taps is used for manual calibration and threading of blind and through-hole taps using a special holder. The recommended bore diameter is 9.0 mm. The first tap, rough, has cut tooth tips, the outer diameter is smaller. The second, finishing, with short tooth segments, has elon..