The Strend Pro 47/17 submersible submersible pump is suitable for pumping clean drinking water or rainwater whose temperature is below 35 °C. The content of solid particles in the water should be less than 0.25% (qualitative fraction). So, if you own a clear water well, don't hesitate to invest in a pump. Most often, a submersible pump is used to pump water from wells, boreholes or shafts. The immersion depth of the pump must not exceed 80 meters and the distance from the bottom should be greater than 100 cm. The pump must not be connected to the existing water supply network as a pressure boosting device.
The motor reaches a power of 1100 W. The cable that connects the pump to the 230 V connection for proper operation is 20 m long. The maximum flow rate offered by the pump is 3300 l/min. The pump provides a maximum displacement of 126 m. The pump is equipped with IP68 protection and insulation class F. Dimensions: Ø 98 x 1010 mm.
| Default | |
| Accessory type | other accessories |
| Hose connection | 1/2“ |
| Power supply | 230V |
| Max. flow rate | 3 300 l/h |
| Max. flow rate (l/h) | 3300 |
| Insulation class | F |
| Max. displacement (m) | 126 |
| Max. temperature of the pumped liquid | 35°C |
| Input | 1100 W |
| Power Input (W) | 1100 |
| Hose connection ("/mm") | 1/2" - 13mm |
| The length of the power cable | 20 m |
| Max. immersion depth | 80 m |
| Displacement | 126 m |
